...

Start up eosdist1 and eosdist2. Login with admin/<enter> when the have booted up, and then enter then <enter>. Enter the command zerotouch cancel when the they have booted up. Enter
To gain privileges and enter configure mode, type the following in the console

enable
configure terminal

Then enter a config like this using console/SSH on eosdist1:

hostname eosdist1
username admin privilege 15 role network-admin secret abc123abc123
vrf instance MGMT
interface Ethernet1
   no switchport
   vrf MGMT
   ip address 10.100.2.101/24
   no lldp transmit
   no lldp receive
interface Ethernet2
   description DOWNLINK
   switchport mode trunk
   channel-group 3 mode active
!
interface Port-Channel3
   description DOWNLINK
   switchport mode trunk
   port-channel lacp fallback individual
   port-channel lacp fallback timeout 3
!
interface Loopback1
   vrf MGMT
   ip address 10.100.3.101/32
!
interface Vlan1
   description ZTP DHCP
   vrf MGMT
   ip address 192.168.0.1/24
   ip helper-address 10.100.2.2
ip routing vrf MGMT
management api http-commands
   no shutdown
   !
   vrf MGMT
      no shutdown

...